Field Instrumentation
Sensors, transmitters, and control loops for flow, level, temperature, and pressure. Mounted, ranged, commissioned, and verified with hands on the device.
01 Industrial Automation
Instrumentation, controls, and the systems that run the world.
Sixteen years with hands on the instruments. Flow, level, temperature, pressure, and analytical measurement: installed, calibrated, commissioned, and verified in the field, including the intermittent faults and hard-to-measure products nobody else will chase down. We troubleshoot the control logic and the PLC and DCS systems around them, and we teach your team to own the result.
/ Capabilities
From the sensor to the control room
It starts at the device. Everything else is built on whether the measurement is telling you the truth.
Analytical Measurement
pH, conductivity, and process analytics: the measurements that foul, drift, and need someone who knows what the reading is actually reporting.
Calibration & Loop Verification
Instrumentation schematics, loop diagrams, and calibration routines that hold up to an audit and keep the loop honest.
Motor & Relay Logic
Motor control circuits, relay logic, and burner management modernized with visibility and safeguards, where legacy meets logic.
PID & Safety Functions
Advanced PID control and Safety Instrumented Functions designed for stability, repeatability, and the times things go wrong.
Control Logic & Troubleshooting
Reading, changing, and troubleshooting the logic running on your PLC and DCS. Custom integration work happens too, scoped to what a specific job needs.
/ Hard problems
The measurement that will not behave
An intermittent reading. A loop that drifts on night shift and nowhere else. A level that is right until the tank gets low. A transmitter that has been replaced twice and still lies to you.
These are the calls we take. Most measurement problems are not instrument failures. They are a process meeting an instrument that was never matched to it: product flashing across an orifice, low-density solids that radar sees straight through, coating, foam, entrained gas, stratification, temperature swings the datasheet never mentioned.
If something is misbehaving right now, instrument technical support lists the symptoms we get called for and where we work. We find out which it is before anyone spends money. Often the instrument you already own is the right one, mounted, ranged, or configured wrong. Sometimes the technology genuinely cannot see your product, and we will tell you that too, with the reasoning behind it.
Intermittent and unrepeatable faultsProblems that behave while someone is watching and return when nobody is.
Hard-to-measure productsFlashing and two-phase flow, low-density solids, foam, slurries, coating and buildup, entrained gas.
Process-induced measurement errorWhere the reading is wrong because of what the process is doing, not because the device has failed.
Repeat failures and serial replacementsThe same device dying again and again is a symptom. We look for what keeps killing it.
Keep it or change it, answered straightWhether the installed technology can be made reliable, or genuinely cannot see your product.
/ Free
Have one of these on your hands right now?
In production, a break-in is the job that jumps the schedule. It is also our initials. Describe what the measurement is doing and a specialist answers you by email, at no cost and with nothing to sign up for.
/ Deliverables
Education with execution
Our work happens through direct engagement, hands-on training, and operational audits. You get documentation a technician can use and measurements you can defend, without replacing equipment that is doing its job.
Pneumatic and assembly line systemsDesign and training for legacy and modern lines.
Schematics, loop diagrams, calibrationDocumentation a technician can actually use.
Advanced instrumentation, PID, SIFControl and safety designed to hold under load.
Motor control, relay logic, burner managementModern safeguards over proven hardware.
PLC and DCS logic and troubleshootingRead it, change it, and fix it, across major OEM platforms.
IT / OT compliance and audit trailsCyber-aware architecture, mapped and documented.
/ Technical Training
We teach what we build
The install is only half of it. Your team learns to run the systems and keep them honest. Sixteen years in the field, plus instructing at the local community college, means the training is current, hands-on, and grounded in real plant work, not slides. The same calculators and reference tables we teach with are free for anyone in the Field Pocket Guide.
Instrumentation and calibration fundamentalsLoops, signals, and field diagnostics done right.
PLC and DCS logic and troubleshootingRead it, change it, and fix it under pressure.
Motor control, relay logic, burner managementProven hardware with modern safeguards.
PID control and safety instrumented functionsStability and safety when it matters most.
IT and OT awareness for techniciansCyber-aware habits for the people on the floor.
/ How we work
Audit, educate, design, deploy
STEP 01
Audit
We walk the floor and map what you actually run, on site, in person.
STEP 02
Educate
Your team learns the systems as we go, so the knowledge stays.
STEP 03
Design
Modular, mobile-friendly, compliance-ready solutions for your operation.
STEP 04
Deploy
Commissioning, loop verification, and a clean handoff with the documentation to back it.
16+
Years in the field
All.
Major instrument OEMs
IT/OT
Compliance mapped
24/7
Audit-trail visibility