Signal Scaling
The straight-line relationship every transmitter lives on. Enter either side and read the other, with percent of span between them. This is the ideal-output side of a calibration: what the loop should do as the input moves.
Guided setup
Describe the scaling in plain words — the input range, the output range, and the value. The wizard runs the exact same math as the form and shows the result with the five-point table right here.
The wizard only asks questions and runs the calculator. Every number comes from the deterministic engine, not the AI.
Ranges
Five-point reference
| % | Input | Output |
|---|---|---|
| 0% | 0 | 4 |
| 25% | 25 | 8 |
| 50% | 50 | 12 |
| 75% | 75 | 16 |
| 100% | 100 | 20 |
Still not reading right?
If the numbers here do not match what the loop is doing, the problem is usually the installation, the ranging, or the process itself rather than the device. Describe the symptom and a specialist answers by email, at no charge.